[Index page]   [Vacuum tubes]   [Components]   [Wireless]  [Radio-devices]   [Assistance]   [Schematics]   [Software]   [Payment]   [Warranty]
 


 

Radio equipment for erthnet links
Projects since 2003

 

 

Item View Price (EUR)

Horn antenna 2.4GHz
Connectot - N-Type Female
Polarization - vertical
Impedance - 50 ohm
Input power - 100W
Gain - 14 dbi
Dimensions max (mm): 115x163x220

 

47

2.4 GHz Wireless-g; 54 Mbps Outdoor Accesses Point;
integrated directional antenna 12dbi; V.1
Multiple Operational Mode (Access Point, Access Point Client, Repeater and Bridge
Power over Ethernet System (PoE)
Up to 3 - 6 Km. distance in mode point to point
Standards IEEE 802.11b/g
Device Management Web-Based
Security 64/128-Bit WEP WPA/WPA2 WPA
Frequency Band 2.4GHz- 2.4835GHz
Channels 1~14 channels
Transmitted Power 30 - 180mW
Interface Ethernet Port
Ports 1x10/100M
Power Input DC 12V over Ethernet cable
Dimensions max (mm): 165x250x110

 Auto rate fallback in case of obstacles or interferences
Supports WPA / WPA2 security enhanced function
Supports WDS(WirelessDistributed System) bridge mode
Provides station mode to act as a wireless LAN client station
Supports roaming link integrity•Supports authentication for wireless connectivity based on ESSID
Provides 64/128 bit key length WEP data encryption
Provides MAC access control•Provides DHCP server
 

119

2.4 GHz Wireless-g; 54 Mbps Outdoor Accesses Point;
integrated directional antenna 12 dbi; V.2

Multiple Operational Mode (Access Point, Access Point Client, Repeater and Bridge
Power over Ethernet System (PoE)
Up to 3 - 6 Km. distance in mode point to point
Up to 8 - 12 Km. distance if one device is  installed into dish 78cm
Up to 15 - 25 Km. distance if both devices are installed into dishes
Standards IEEE 802.11b/g
Device Management Web-Based
Security 64/128-Bit WEP WPA/WPA2 WPA
Frequency Band 2.4GHz- 2.4835GHz
Channels 1~14 channels
Transmitted Power 30 - 180mW
Interface Ethernet Port
Ports 1x10/100M
Power Input DC 12V over Ethernet cable
Dimensions max (mm): 135x202x196

 Auto rate fallback in case of obstacles or interferences
Supports WPA / WPA2 security enhanced function
Supports WDS(WirelessDistributed System) bridge mode
Provides station mode to act as a wireless LAN client station
Supports roaming link integrity•Supports authentication for wireless connectivity based on ESSID
Provides 64/128 bit key length WEP data encryption
Provides MAC access control•Provides DHCP server
 
129

AMP2441 Bi-Directional Amplifier
Transmit Amplifier Specifications: Transmit Gain 16 dB
Frequency Response: +/-1 dB over operating range
Max Transmit Output Power: 1 Watt with 25 mW input
Transmit Input Power: 3.2 mW minimum / 100mW maximum
Receiver Low Noise Amplifier Specifications
Receive Gain: 16 dB typical
Frequency Response: +/-1 dB over operating range
Noise Figure: 3.5 dB typical
Environmental/Mechanical Specifications
Temp. Range: -40° C to +60° C
Power: 11 to 14VDC @ 900 ma peak 500 ma avg.
Dimensions max (mm): 51x77x15

Transmit input levels from 3.2mW to 100mW
Up to 16dB transmitter power gain
Low noise receiver pre-amp with 16 dB gain
Power and Transmit LEDs on both the amp and the DC power injector
Built-in Lightning Protection
DC Surge Protection
Heavy Duty "N" Connectors

99

  [Back to Index page]