[Index page]   [Vacuum tubes]   [Components]   [Radio-devices]   [Assistance]   [Schematics]   [Software]   [Payment]   [Warranty]
 


Tube parameters and components of Pi - network, 
are defined by "RF Amplifiers' Developer 2001".


Information about amplifier is completely published in these journals
(RU)

 


P
arameters of Untraditional  amplifier:
_________________________________________________________________

Plate supply voltage DC (V):................................2600
Screen supply voltage (V):..................................360
Single-tone plate current (A):..............................0.6
Zero-signal plate current (A):..............................0.01
_________________________________________________________________

RFC2-choke is wound on 124mm long piece of 30mm diameter Teflon rod. Inductance - 135uH. 
The choke is wound using 0.5mm enameled wire.
L3-Parasitic suppressor. Made from 3 turns of 5mm
wide copper strap, 2mm thick. Shunt the strap with 50ohm 2-W carbon-composition resistor.
L4-9T, 93mm long of 6mm diameter copper tubing,
45mm ID.
Tap at 3T for 10-12m, 5T for 15-17m, 9T for 20-30m.
L5-32T, 96mm long of 48mm ID coil stock, the space between each turns is 3mm. Diameter of wire is 2mm.
Tap at 9T for 40m, 20T for 80m, 32Tfor 160m.

 

    

 

[Back to Index page]