[Index page]   [Vacuum tubes]   [Components]   [Wireless]  [Radio-devices]   [Assistance]   [Schematics]   [Software]   [Payment]   [Warranty]
 
 

Components for amplifiers

 
Description View Price (EUR)
ID: RPV2/7-24
 Antenna  relay:  input relay of powerful amplifiers.
100W up to 60MHz; 24W up to150MHz; 
Control voltage: 24V - 27V; 
Switching speed: 5ms on/3ms off  (suitable for QSK);
Dimensions max.: 28x32x10mm;  Weight: 20gr		 10
ID: REV-15
Antenna coaxial relay:  handle 1.5 kW at 600 MHz;  2 kW at 430 MHz and up to 2.5 kW at 14 MHz
  R=75ohm; Control voltage: 24V - 27V; Switching speed 30ms on/10ms off;  
Dimensions max.: 82x63x28mm; Weight: 210gr +160gr (3 plugs)		 -Preview- 29
ID: REV-14
Antenna coaxial relay:  handle 1.5 kW at 600 MHz;  2 kW at 430 MHz and up to 2.5 kW at 14 MHz
  R=50ohm; Control voltage: 24V - 27V; Switching speed: 30ms on/10ms off ;
Dimensions max.: 82x63x28mm;  Weight: 220gr + 160gr (3 plugs)		 32
ID: REV-16
Ant. coax. relay:  500W up to 1000MHz;  R=50ohm;
Control voltage: 24V - 27V; 
Switching speed: on/off <30ms;  
Dimensions max.: 70x52x25mm;  Weight:140gr +120gr (3plugs)		 26
ID: P1D-1V
 Antenna vacuum relay for VHF PAs: 1.5kW up to 30MHz;  R=50ohm;
 Maximum switching voltage: 1.5kV;
Maximum current: 3A; Switching speed: suitable for QSK
Control voltage: 24V - 27V;
Dimensions max.: diameter - 23mm; length - 39mm		 37
ID: V1V-1V
RF Vacuum relay (switch): inductor taps' commutation of  powerful transmitters up to 5 kW max.
Maximum switching voltage: 3kV; 
The maximum current:10A up to FRQ 30mHz
Control voltage: 24V - 27V; Coil resistance: 255 - 280 ohm
Dimensions max.: diameter - 29mm; length - 72mm; Weight: 100 g		 26
ID: V2V-1V
RF Vacuum relay (switch): inductor taps' commutation of  powerful transmitters up to 10 kW max.  
Maximum switching voltage: 4kV; 
Nominal current:15A up to FRQ 30mHz; Maximum current:35A
Control voltage: 24V - 27V; Coil resistance: 180 - 200 ohm
Dimensions max.: diameter - 58mm; length - 115mm; Weight: 265 g 		32
ID: P-1D-21
RF power relay (switch): Inductor taps' commutation of VHF powerful transmitters up to 10 kW max.
Control voltage: 24V - 27V;
Dimensions max.: diameter - 29mm; length - 70mm
Weight: 380gr		 -Preview- N/A
ID: K-HV-19
RF high voltage relay (switch): Additional HV RF capacitors' commutation of Pi-networks.
Maximum switching voltage: 6kV;
The maximum current: 5A up to FRQ 30mHz
 Control voltage: 24V - 27V;
Dimensions max.: diameter - 44mm; length - 100mm; Weight: 200 g		 N/A
ID: KVI-3-2200
RF-type doorknob capacitor for transmitters: 2200pF/10kV; 
Dimensions: diameter - 40mm; thickness - 18mm ; 		N/A
ID: KVI-3-3300
RF-type doorknob capacitor for transmitters: 3300pF/10kV; 
Dimensions: diameter - 50mm; thickness - 10mm ; 		10
ID: KVI-3-4700
RF-type doorknob capacitor for transmitters: 4 700pF/5kV; 
Dimensions: diameter - 50mm; thickness - 16mm ; 		7
ID: C-10-3-18
H.V. Oil filled filter capacitor: 10uF/3kV;
Dimensions: 87x182x162 mm;
Weight: 3.9kg		 18
ID: C-100-1-21
H.V. Oil filled filter capacitor: 100uF/2kV;
Dimensions: 88x128x142		 21
ID: C100-1-15
H.V. Oil filled  filter capacitor: 100uF/1kV;
Dimensions: 87x87x150mm; Weight: 1.9kg		 -Preview- 15
ID: R50/200-16
 Carbon resistor: 50ohm - 200W  (dummy load).
Dimensions max.: 300x22mm;
Weight: 0.3kg		  -Preview- 16
ID: L-140-69
Ball type variable inductor: 0.7 - 9.5 uH
Intended for power amplifiers  3 - 5kW from 1.5 to 30MHz
 Dimensions max.: 148x140x215mm;
 Weight: 2.15kg		 -Preview- 89
ID: KPE 10-200/4
Variable capacitor: 10pF - 200pF/4kV
 Dimensions max.: 175x114x100		 -Preview- 54
ID: KPE 10-250/2.5
Variable capacitor: 10pF - 250pF/2.5kV
 Dimensions max.: 145x82x75		 -Preview- 49
ID: KPE 30-1100/1.5
Load Variable capacitors for Army transmitters: 30pF - 1100pF/1.5kV
 Dimensions max.: 195x117x105		 N/A

 Components for amplifiers custom made
 Install  Autodesk Viewer  for viewing schematics by MS Internet Explorer.

Description   View Price (EUR)
ID: PCB1
Inrush current limitter:
provides smooth start-up of amplifier, limits over-currents of tube heater and components, increasing their  life time.
AC current 2 - 5A (16A pk); 
 Dimensions of  printed circuit board with installed components: 55x75x28mm
All components are installed on PCB. It is fully completed and workable part.
 Schematic view		 N/A
 
ID: PCB2
Screen  voltage regulator:  
 could be used for linear amplifiers using most of powerful tetrodes.
Output voltage can be ordered from +280 to + 360V; 
Output peak current 300mA; 
Dimensions of  printed circuit board with installed components: 130x130x38mm
All components are installed on PCB. It is fully completed and workable part.
 Schematic view		 N/A
ID: PCB3
Grid voltage regulator: 
could be used for amplifiers using most of powerful tetrodes
Control from –20 to -80V; output current max.:120mA;
Included: grid current breaker (grid protection from over-current);
PA RX-TX control and voltage regulator for +24 - 27V;
Dimensions of printed circuit board with installed components: 130x130x32mm
All components are installed on PCB. It is fully completed and workable part.
 Schematic view		 N/A
ID: RFC1
Anode RF Choke (polycaproamide): for all bands (160m - 10m)  including WARC and CB;
For PA up to 1800W CW output;
Dimensions max.: diameter -25.5mm; length -135mm   		 N/A
ID: RFC2
Anode RF Choke (teflon): for all bands (160m - 10m) 
including WARC and CB; For PA up to 3000W CW  output;
Dimensions max.: diameter - 32mm; length -148mm; 		 N/A
ID: RFC2.1
Anode RF Choke (polycaproamide): for all bands (160m - 10m) 
including WARC and CB; For PA up to 3000W CW  output;
Dimensions max.: diameter - 32mm; length -148mm; 		 27
ID: RFC3
 Anode RF Choke (teflon): for all bands (160m - 10m) 
including WARC and CB; For PA up to 5000W CW output;
Dimensions max.: diameter - 32mm; length -187mm;          		 N/A
ID: RFC3.1
 Anode RF Choke (polycaproamide): for all bands (160m - 10m) 
including WARC and CB; For PA up to 5000W CW output;
Dimensions max.: diameter - 32mm; length -187mm;    		 N/A
ID: RFC4
Anode RF Choke: for 6 m and 2 m bands; 3 capacitors 56pF/6kV
For PA up to 1500W CW output;
Dimensions max.: bottom size-75mm; length -90mm   		 16
ID: RFC5
Filament RF Choke:  ferrite core
Dimensions max.: 68mm x 68mm x 20mm		 18
ID: RFC6
Output RF Choke:  teflon core, teflon insulation of wire.
 This prevent dangerous high voltage from appearing on the feed line or antenna. It also prevent electrostatic charge - from antenna  or from blocking capacitor leakage (tube anode to Pi-network).
 DC discharge current 50A pk. Dimensions max.:  diameter - 18mm; lengh100mm;		 N/A

[Back to Index page]